The characteristics of the bottom welding process of Polypropylene Storage Tanks
Mechanization, the highest degree of automation, product quality stability; The welding seam specification can be designed according to the stress bearing characteristics of the product, so that it can give full play to the integrity of the weld. The product integrity is good, the weld is integrated with the mother, and the corrosion resistance and leakage resistance are good; Can reduce flying edge, seam level beautiful; Add ultraviolet absorbent to PPH granules to prevent aging and prolong the service life.
Product parameters of the Polypropylene Storage Tanks
Polypropylene Storage Tanks Type : Round
Material : PPH Winding Tank (Grey )& HDPE Winding Tank ( Black)
Size: Volume 0.5m³ to 60m³
Use :Chemistry, Iron & Steel, Metallurgy, Pharmacy ,paper making , electric power, food and water treatment, etc.
Advantages of Product Production Process
The exclusive method of the winding process without welding developed is a guarantee of the excellent technical strength and reliability of our tanks.
Last news:
Safety precautions for PP Storage tank
1. The operation of this equipment must be strictly and systematically trained, and the operator who has passed the examination(written and actual operation) and obtained the operating license of the equipment shall conduct the operation of the equipment. Any personnel who have not been trained shall strictly prohibit the operation of the equipment.
2. Not familiar with the performance of equipment strictly prohibit operating equipment, safety and protection supplies not wearing complete strictly prohibit equipment, not all familiar with the equipment operating rules strictly prohibit operating equipment.
3. The professional technicians and alert personnel on the scene have the right to prevent and correct other people's illegal operations, adventure and brutality and other unsafe behaviors; The right to refuse to comply with safety requirements or violate the rules and regulations of command, dispatch and scheduling.
4. All personnel entering the unloading area are prohibited from entering with communication tools! Must perform the body electrostatic discharge operation at the electrostatic discharge point!
5. Before starting work, it is necessary to check whether the insulation pads in front of each control cabinet are complete and dry. The device must be used to check whether the device has leakage before starting.
6. The equipment should press the red emergency switch in case of an emergency, turn off the total power supply of the equipment, immediately notify the equipment maintenance worker to handle it, and notify the relevant management personnel and equipment personnel to strictly prohibit unauthorized handling.
7. It is strictly forbidden under any circumstances for equipment safety protection devices to be removed, damaged, shorted or diverted for any reason to render the safety protection facilities ineffective.
8. It is forbidden to operate equipment when eating or drinking drugs or beverages that reduce attention or trance.
9. Interns are forbidden to operate equipment alone without the supervision of a monitor or master!
10. It is strictly forbidden to enter the equipment's internal intervention in all or part of the body during the operation of the equipment when the process is immature and unreasonable.
11. It is strictly forbidden to start work when the plant leaks or the water around the equipment.
12. All types of lubricants and liquid media must be cleaned in time if spilled. It is forbidden to operate in a wet and slippery environment.
13. It is strictly forbidden to place items in operating cabinets and operating platforms to prevent short-circuit injuries and damage to equipment.
14. When the operator is repairing or cleaning the equipment, he must turn off the power supply of the equipment and hang the safety warning sign of "no closing, someone working". He must have someone to monitor it. It is forbidden to operate alone! No use of chemical fiber material cleaning and cleaning equipment!
15. The purchasing manager of JIT Matching Office issued the notice of incoming and outgoing materials in written form one day in advance. The Human Resources Department arranged the alert of the unloading area. The production company was ready to unload the materials. The tanker must be equipped with a damper. It is forbidden to burst in the hot sun! Do not discharge material in thunder rain! Tanker trucks are strictly forbidden to stay at the company gate for more than 60 minutes!
Hot Tags: polypropylene storage tanks, China, factory, suppliers, manufacturers, high quality, price, sell